Active IR beam smoke detector TX/RX – 100 metres

IR beam smoke detector TX-RX. The IR beam smoke detector operates by detecting the interaction between smoke, generated by the early stages of a fire, and an infrared beam emitted
by the transmitter and received by the receiver. The system operates over a maximum distance of 100 meters. It is housed in a white ABS container and features an optical sight for easy initial alignment. This barrier is equipped with an internal display module, enabling calibration via the BF TEST accessory and providing feedback on the received signal strength. The sensitivity can be adjusted to optimize the detection threshold depending on the working distance (ranging from 5 to 100 meters). The detector includes two relay outputs (NC/NO) for signaling faults and alarm events. An additional alarm output is available for connection to conventional control panels. It also features an automatic reset function after the condition that triggered the alarm is cleared. The system can be integrated with the XFIRE control panel via the optional XFIRE BF module, allowing direct connection to the control panel’s loop. Additionally, the barrier includes a built-in serial interface for connecting to the optional BRC remote monitoring panel, which can monitor up to 16 barriers simultaneously. For easier management, the optional BTM module enables Bluetooth connectivity, allowing data to be accessed and displayed through a dedicated app. Technical data: power supply: 11.5 to 27.8 Vdc, current consumption 25mA, dimensions (WxHxD): 159 x 211 x 96 mm, weight 1500 g (TX and RX), operating temperature from -25°C to +55°C, IP rating IP64. CPR certified in accordance with EN 54-12.

Coverage

from 5 to 100 meters

Power supply range

11,5 – 27,8Vdc

Maximum power consumption

25mA couple

Working Temperature

from -25°C to +55°C

Output

2 relè (Guasto e Allarme)

Optional

Connection to BRC, Reset with DIP, XFIRE-BF

Type

TX & RX

IP rating

IP64

Dimensions (LxHxP)

159 x 211 x 96 mm

Weight

1500g (TX & RX)

Standards & Approvals

CE, EN 54-12

Smoke detection system made of an Emitter and Receiver which can detect and determine the quantity of smoke in the protected area.

Coverage

from 5 to 100 meters

Power supply range

11,5 – 27,8Vdc

Maximum power consumption

25mA couple

Working Temperature

from -25°C to +55°C

Output

2 relè (Guasto e Allarme)

Optional

Connection to BRC, Reset with DIP, XFIRE-BF

Type

TX & RX

IP rating

IP64

Dimensions (LxHxP)

159 x 211 x 96 mm

Weight

1500g (TX & RX)

Standards & Approvals

CE, EN 54-12

CERTIFICATIONS / APPROVALS

  • EN 54-12

Code: 4442103 Item: Category:
Coverage: from 5 to 100 meters Power supply range: 11,5 - 27,8Vdc Maximum power consumption: 25mA couple @ 24Vdc Working Temperature: from -25°C to +55°C Output: 2 relè (Guasto e Allarme) Optional: Connection to BRC, Reset with DIP, XFIRE-BF Type: TX & RX IP rating: IP64 Dimensions (LxHxP): 159 x 211 x 96 mm Weight: 1500g (TX & RX) Standards & Approvals: CE, EN 54-12
FEATURES AND ADVANTAGES

Description

  • Easy calibration
  • Equipped with an optical viewfinder
  • Adjustable sensitivity level via DIP switch
  • The barrier is equipped with alarm, fault and consumption outputs
  • Auto reset function
  • Serial interface to connect up to 16 barriers to the BRC keypad
  • CPR certification in accordance with EN54-12 standards.