Reflecting IR Beam Smoke Detector- detection range: 100m – EN54-12

Smoke detection beam made of a Transmitter and a Receiver, capable to detect and determine the quantity of smoke which is present in the protected area. The beam has a serial interface in order to connect up to 16 units to the remote panel (BRC) showing the same indications. EN54-12.

Coverage

from 5 to 100 meters

Power supply range

11,5 – 27,8Vdc

Maximum power consumption

10mA

Working Temperature

from -25°C to +55°C

Output

2 relè (Guasto e Allarme)

Optional

Connection to BRC, Reset with DIP, XFIRE-BF

Type

TX/RX + reflector (20×30 cm)

IP rating

IP64

Dimensions (LxHxP)

159 x 211 x 96 mm

Weight

750g beam, 960g reflector

Standards & Approvals

CE, EN 54-12

Smoke detection system made of an Emitter/Receiver group. Thanks to a reflecting panel, it can detect and determine the quantity of smoke in the protected area. Full product range with ranges from 5 to 120 metres.

Coverage

from 5 to 100 meters

Power supply range

11,5 – 27,8Vdc

Maximum power consumption

10mA

Working Temperature

from -25°C to +55°C

Output

2 relè (Guasto e Allarme)

Optional

Connection to BRC, Reset with DIP, XFIRE-BF

Type

TX/RX + reflector (20×30 cm)

IP rating

IP64

Dimensions (LxHxP)

159 x 211 x 96 mm

Weight

750g beam, 960g reflector

Standards & Approvals

CE, EN 54-12

CERTIFICATIONS / APPROVALS

  • EN 54-12

Code: 4442106 Item: Category:
Coverage: from 5 to 100 meters Power supply range: 11,5 - 27,8Vdc Maximum power consumption: 10mA @ 24Vdc Working Temperature: from -25°C to +55°C Output: 2 relè (Guasto e Allarme) Optional: Connection to BRC, Reset with DIP, XFIRE-BF Type: TX/RX + reflector (20x30 cm) IP rating: IP64 Dimensions (LxHxP): 159 x 211 x 96 mm Weight: 750g beam, 960g reflector Standards & Approvals: CE, EN 54-12
FEATURES AND ADVANTAGES

Description

  • The barrier is equipped with an internal device (2-display module) for calibration and checking of the received signal in real time.
  • The boards are equipped with an optical viewfinder placed on one side that allows a rough alignment.
  • The board performs a self-calibration every 24 hours from the time of first delivery to compensate for any masking caused by dust ont he
    lenses and reflectors.
  • Adjustable sensitivity with a DIP switch to get a better intervention threshold according to the working distance.
  • The barrier is equipped with alarm, fault and consumption outputs, which allow it to be connected to standard fire control panels.
  • The barrier has a serial interface to connect up to 16 units to BRC keypads.
  • Selection of models (40-60-100-120) according to the working distance.
  • Dimensions (DxLxH): 96 x 159 x 211 mm.
  • CPR certification in accordance with EN54-12:2015.